Boating to the San Juan Islands for the first time on Kokomo

Boating to San Juan Islands – Part 1

Boating to the San Juan Islands for the first time. When we bought our boat, Kokomo in May, we hadn’t planned on taking a trip this summer to the San Juan Islands, as we wanted to become more familiar with the boat, etc. But my sister Susan thought it would be fun for us to boat up there with them and invite my brother and his wife. So we mapped out a 6 day vacation leaving Seattle and head first to La Conner, which is 54 nautical miles.

My brother Ron and his wife Patsy, stayed with us the night before and we headed down to Elliott Bay Marina first thing in the morning. We learned right away that all of us over packed both food and clothing. Our boat, Kokomo has lots of storage, but it’s not that easy to access and if you don’t use it, things get cramped quickly. It took four carts to load the boat with refrigerated items, beverages and their stuff (and remember, we had already loaded our clothes and non perishables the weekend before!).

The winds normally come from the north or northwest, but on Thursday they were 8 knots from the south – which really helped us out a lot!

My sister Susan and her husband Kurt were traveling on their 34′ trawler Semper Fi at about 7 knots and they left Shilshole Marina around 8:30am on Thursday, July 20th. We knew we could catch up to them traveling about 17 knots, so we didn’t leave until 10:15am.

We caught up with them around the north end of Whidbey Island, around 11:45am. Scott thought it would be funny to circle around them, but you know the story of the Tortoise and the Hare? Well, more on that later. After we circled around them, Kurt called me to say we had a loose line. Turns out one of the lines on our dingy had come loose and was flying all over the place, including under the engines, yikes! Soon enough Karma caught up to us and about an hour later.

We started hearing a rattling / pinging noise from one of the engines, so we stopped and decided to check it out. Since we have two engines, we can use each of them to compare what the other should look like. We noticed right away that the power steering pulley was at an angle and there were also some metal fragments from the ball bearings. Not sure what we should do, since the serpentine belt was still working, but noisy, I called my brother-in-law Kurt (retired Chief Engineer for the Washington Ferries) and he zipped over on his dingy for a quick assessment. Determined that the power steering pump needed to be replaced, we now had to limp into La Conner on one engine – and 8 knots, right along side Semper Fi.

Luckily for us, the waters (as you can see in the photos and video) were very very calm for the sound. So calm, that Patsy and I decided to sit on the bow and enjoy the smooth ride up.

Ron relaxed on the stern…….

To get to La Conner, you enter a channel and then up the Swinomish Slough.

We had made reservations a few weeks ago and were fortunate to be on G Dock on the outside on the end, since we didn’t have much steering control. Semper Fi was right next to us.

We called the local NAPA store and they had the part. The La Conner Marina staff was so helpful and drove Scott down to the store. He had taken the old pump with him and when he got the new pump, they informed him that it didn’t come with the pulley shaft and that a machine shop, La Conner Maritime Services would have to use the hydraulic press to remove it from the old one and put in it in the new one. They would be able to do that in the morning.

The La Conner Marina is very quiet and has nice facilities for restrooms and showers. That evening, we all walked into town for dinner. La Conner is super cute with lots of quaint restaurants and shops. We were drawn in by fresh oysters (not me!) at the Oyster and Thistle Pub and decided to eat there for dinner. Now that I’m looking at a map, there were many other restaurants to choose from…..but we stumbled on this quaint cute place first.

Knowing we had to fix the boat, Scott woke up bright and early and headed to La Conner Maritime Services. He picked up the part and we thought we were on the home stretch, when he realized it was not threading (connecting) to the engine. Uh ho! Turns out it couldn’t reach and it needed an adapter piece. We called all of the parts stores, nothing. At this point we are preparing to limp home on one engine and transfer my brother, his wife and all of their stuff over to my sister’s boat. Not a fun moment.

Kurt and Scott were not giving up and they went to La Conner Maritime that put the shaft in to try and find this piece in the back room. Still no luck. That’s when Kurt got the idea of taking the old part off of the original pump and using it! Voila!! That worked great. Scott then added power steering fluid and went to put the cap on when there was no cap. The new pump didn’t come with one. Now what?? Wait – why don’t we go back to the machine shop and get the cap off of the old pump Voila again! Note to self: always keep your old parts until you are sure you are done with them!

We were finally on our way to Fisherman’s Bay on Lopez, Island! Let the vacation begin! Stay tuned for part two!